Multi Tool Blades

United Diamond Tools (UDT) sells three types of blades for Fein multi tools with the SuperCut tool holder (pre 2016).
(You can also use them if you have an adaptor - which we do not sell).
These blades can be used for cutting tiles, removing grout and a variety of other uses. These premium quality blades are the same price as cheap blades, but perform far better, so offer fantastic value for money.

Multi Tool Blades:
	Sickle blade 64mm segment blade 92mm segment blade Suits Fein multi tools with SuperCut tool holder (pre 2016) or with an adaptor (try Bunnings). The ID (point to point) is 20mm. The OD (point to point) is 21.9mm. Diamond section approx 1.52mm thick (when new) $15 each incl GST or one of each (3 total) for $36 (postage from $13)

Grinding and shaping wheel
	125mm/5" only ($75 each incl GST)	125mm/5" DTA Boss Diamond Grinding and shaping wheel. Ideal for grinding, rounding, bevelling, small cuts and more M14 fitting suits most grinders. Suits porcelain, ceramic and marble tiles Diamond edge 2.5mm thick (when new)

Electroplated diamond blades with round centres:
See full range here

DBS2ELECTRO	Electroplated Blades	Trade	16mm	2"	50mm	$10
DBS25ELECTROSEMI	Electroplated Blades - semi round	Trade	10mm	2.5"	63mm	$10
DBS3ELECTRO	Electroplated Blades	Trade	10 or 16mm	3"	75mm	$10

Truacut electroplated Diamond Jig saw blades. They are:  - 2 blades per pack  - 50mm cut length  - 30 grit  - universal fitting (so fit most AEG, Bosch, Dewalt, Festo, Rok, Hitatchi, Makita, Metabo etc jigsaws). They are suitable for cutting:  - ceramics  - tiles  - fibreglass  - compressed fibre board  - cement  - light bricks. Electricians use these to cut fibre cement board for down lights. (Part number S130DG/2). $22 each pair incl GST

Diamond Pipe Cutters
These are used for cutting PVC pipes clean and square below the surface.
Ideal for plumbers, tilers and electricians.
Can be used with most rotary drills.
IPC100-30 30mm diamond blade with 100mm spindle, 12mm hex fitting $25 incl GST
IPC100-50 50mm diamond blade with 100mm spindle, 12mm hex fitting $30 incl GST
IPC30 30mm replacement diamond blade $8 incl GST (6mm centre)
IPC50 50mm replacement diamond blade $12 incl GST (6mm centre)

Dymaxion diamond hole enlarger  - 35mm diameter. 
Used to enlarge an existing hole.
Suitable for most building materials including porcelain and stone. 
Will also grind irregular shapes and rebates.
10mm hex shank, 25mm diamond coating.
Attach to drill and slowly rotate in anti clockwise direction, using firm pressure. 
HDEE35 $99 incl GST

Note - If you are cutting dry, always be aware of the danger of breathing in the dust. Ensure a dust extraction system is used with a suitable filter fitted. Use a half face respirator or a PAPR (Powered air purifying respirator). Even if you are cutting wet, the slurry created can dry out and create a hazard for other users - dispose of slurry as per your local regulations.

Prices correct as of 1/5/21 but subject to change. All prices are each and include GST.

Please see our Contact Us page for Australia wide delivery information.

Disclaimer: the information on this website is provided in good faith and believed to be reliable and accurate at this time.
However, the information is provided on the basis that the reader will be solely responsible for assessing the information and its veracity and usefulness. UDT shall in no way be liable, in negligence or howsoever, for any loss sustained or incurred by anyone relying on the information, even if such information is or turns out to be wrong, incomplete, out-of-date or misleading.