Block Saws

Looking for a block saw?
United Diamond Tools can get the block saw you are looking for!

500mm/20" Block Saw




Easymix 20"/500mm Block saw
With either:
 -  Teco 2.2kW single phase electric motor
 - or Honda GX270 petrol engine
Max cut depth 200mm, max length 540mm.
Adjustable water supply valve
Detachable base for ease of transport
Powder coated frame
Blade not included  
$5300 Incl GST

20" Block Saw Blade - SILENCED.
For concrete, reconstituted limestone.
30mm/1" centre.
(For tile/block saw use only)
$480 Incl GST

Prices valid 1/2/24 but subject to change without notice.

  • Block saw motors are splash proof, not waterproof (usually IP55).
  • Block saws have big motors - ensure there is sufficient power available to run them
  • Do not run off generators - they may not be 240 volt, 50Hz, or are usually too small for the motor
  • Use only heavy duty (2.5mm minimum but preferably 4mm) extension cords and keep them as short as possible (under 20m).
  • Put any other machinary on a seperate electrical circuit so as not to overload the circuit.
  • Easymix saws - always fit pin that locks saw to stand! 

For the operation and spare parts manuals for these machines  Click Here 

Silica dust - When workers cut, saw, drill, polish, crush or grind products that contain silica, particles are created, which are one-hundredth of the size of a grain of sand. These can get  stuck deep in the lungs. 
Ensure precautions to limit exposure to dust are in place.
See the WA government's info on silica dust here.

Disclaimer: the information on this website is provided in good faith and believed to be reliable and accurate at this time. However, the information is provided on the basis that the reader will be solely responsible for assessing the information and its veracity and usefulness. UDT shall in no way be liable, in negligence or howsoever, for any loss sustained or incurred by anyone relying on the information, even if such information is or turns out to be wrong, incomplete, out-of-date or misleading.


United Diamond Tools

U9, 84 Barberry Way
Bibra Lake
Western Australia 6163

Telephone: (08) 9434 6878