Early Entry Diamond Blades
After concrete is poured, it hydrates and sets. During this process, the material shrinks and develops internal stresses that are visible as random cracks in the surface. To prevent random cracks from occurring, controlled, shallow cuts can be made with Early Entry Blades , reducing the tension in the material.
These blades are used for cutting uncured concrete with Tyrolit Early Entry saws, or the Husqvarna Soff Cut saws.
The Tyrolit blades have a 1"/25.4mm centre to suit the Tyrolit saws, or you can knock out the insert to reveal the triangular centre to suit Husqvarna soff cut saws.
The Syntec blades are triangular shape only to suit Husqvarna Soff cuts only.
- Gold blade - hard bond for soft aggregate
- Red blade - medium bond for medium aggregate
- Purple blade - soft bond for hard aggregate
These purple blades are the most popular, and are ideal on hard or medium aggregate.
As a rule of thumb, the gold blade is for same-day cutting, the red blade is for next day cutting and the magenta blade is for cutting after 2-3 days.
Syntec EARLY ENTRY DIAMOND BLADE |
||
|
152mm x 2.6mm x triangular drive Gold blade - hard bond for soft aggregate Red blade - medium bond for medium aggregate Purple blade - soft bond for hard aggregate All bonds - $115 incl GST each 150mm skid plate to suit $115 Incl GST each |
TYROLIT EARLY ENTRY DIAMOND BLADE |
||
|
152mm x 2.6mm x 25.4mm 165mm x 2.6mm x 25.4mm 203mm x 2.6mm x 25.4mm 343mm x 2.6mm x 25.4mm 358mm x 2.6mm x 25.4mm |
|
We also have Tyrolit stainless steel skid plates in stock. The skid plate easily attaches to the two spring-loaded pistons at the bottom of the blade block. This allow the skid plate to maintain the ideal pressure on the concrete slab, ensuring the highest quality cut, without ravelling.
|
||
Machine Types Key: |
||
![]() |
Early entry Saw |
Prices correct as of 1/2/22 but subject to change.
All prices are each and include GST.
Please see our "Contact Us" page (here) for Australia wide delivery information.
Disclaimer: the information on this website is provided in good faith and believed to be reliable and accurate at this time. However, this information is provided on the basis that the reader will be solely responsible for assessing the information and its veracity and usefulness. UDT shall in no way be liable, in negligence or howsoever, for any loss sustained or incurred by anyone relying on the information, even if such information is or turns out to be wrong, incomplete, out-of-date or misleading.
© uni laser icut qhp norton series zip cut perth W.A. adelaide
United Diamond Tools
U9, 84 Barberry Way
Bibra Lake
Perth
Western Australia 6163
Telephone: (08) 9434 6878
Mobile: 0419 901 533
Email: sales@udt.com.au