Basic Safety when working with Diamond Blades

Always wear eye and hearing protection! Wear respiratory mask for dry cutting!

Careless or improper use of a diamond blade could cause personal injury!

  • Do not use any tools if damage is suspected.
  • Beware of sun damage to the operator
  • Install the blade with the arrow pointing in the rotation direction of the tool.
  • Use a blade that is suitable for the machine and the material to be cut.
  • Check for suitability before cutting dry.
  • Check diamond blade for damage before installing.
  • Check machine condition before performing any cutting operations.
  • Check for a tight fit to the shaft of the machine.
  • Check condition of blade regularly.
  • Check all electrical cords and plugs (if applicable) and protect them from water.
  • Never cut without the safety guards in place.
  • Be aware of fume build up even in open buildings
  • Do not apply side pressure or use it as a side grinder.

Disclaimer: the information on this website is provided in good faith and believed to be reliable and accurate at this time. However, the information is provided on the basis that the reader will be solely responsible for assessing the information and its veracity and usefulness. UDT shall in no way be liable, in negligence or howsoever, for any loss sustained or incurred by anyone relying on the information, even if such information is or turns out to be wrong, incomplete, out-of-date or misleading.