Core Drilling Units

Here is our range of Core Drilling Units for sale in Perth, Western Australia:

Dymaxion AGCDM250 Core Drill & stand

Big, powerful core drill that can drill reinforced concrete up to 250mm.

index.png

dm230-husqvarna.png

Big, powerful core drill and stand that can drill reinforced concrete up to 250mm, yet only weighs 25.3kg complete.
3 speed

2200 watts, 10 amp plug
Suits 1 1/4" UNC drill barrels, up to 250mm capacity in concrete.
Stand included - 820mm height, 90° to 45°
Includes factory spanners

25.3kg.

Note - see our "Used Machinery" page here for a second hand unit

TECHNICAL SPECIFICATIONS:
Voltage: 230V
Power: 2200W
No Load speeds: RPM 650/ 1000 / 1250 rpm
Full load speeds: 450/ 650 / 850 rpm
Speeds: 3
Spindle thread, outer: 1 1/4" UNC
Water Swivel - Yes
Overload Protection - Yes
Clutch - Mechanical
RCD - Yes
Machine Weight 25.3 kg
Rig Height from bracket to floor - 820mm
Rig angle: 90° to 45°

Eibenstock PLD182/BST182 Drill & Stand

 Drill up to 182mm in concrete

 logo.png
pcd1700hh.png
  • 2300 watts
  • 3 speed
  • Soft start
  • Constant Speed
  • Mechanical clutch
  • Rated speed: 480/1080/2350 RPM
  • Drilling diameter: 12 - 202mm
  • 21.5kg total
  • G1/2" female and 1 1/4" UNC  male
  • Drill stand collar: 60mm
  • Column length: 995mm
  • Maximum inclination: 45°
  • Quick Mounting System
  • In a box, with spanners

Eibenstock Core Drill Stand/Motor 162mm DB160

The compact unit for drilling up to Ø 162 mm

logo.png

agcdm160.png


 
  • 2500 watts
  • 1 speed
  • Motor and rig as a complete unit
  • Constant Speed
  • Mechanical clutch
  • Rated speed: 450 RPM
  • No load speed: 700RPM
  • Drilling diameter: 162mm
  • Column length: 790mm
  • 15.5kg
  • G1/2" female and 1 1/4" UNC male
  • In a box

 

Eibenstock Core Drill Stand/Motor 162mm DBE162

The versatile combination for drilling up to Ø 162 mm

golz.png

 fb33p.jpg.png

Features:

  • Electronics - soft start, temperature and overload shutdown, overload LED, constant speed maintenance.
  • Service LED - timely information on changing the carbon brushes (lights approx. 10 hours before switching off).
  • 3-speed oil-immersed gearbox - optimum lubrication in all working positions thanks to a specially developed oil pump and matched torque / speed ratio for all diameters.
  • Mechanical safety clutch.
  • Combination spindle with integrated mounting for centering rod - fast, precise drilling.
  • PUR construction site cables - resistant to hard construction site use.
  • Exchange system - quick changeover between wet and dry application.
  • Integrated dragonflies on the machine and auxiliary handle as well as on the carriage, scale and bore centre indicator on the drill stand - precise work.
  • Quick-release system - tool-free insertion of the motor into the drill stand.
  • Drilling column steplessly swiveling up to 45 °
  • Compact combination foot - fixing with dowel or vacuum (vacuum set required).
  • Feed lever can be reversed right / left - easy change of operating side.
  • Wheel axle can be retrofitted (accessory) - easy transport.

TECHNICAL DATA:
Input: 2200 W
Distance column / center of drill bit: 130 mm
Stroke: 700 mm
Nominal voltage: 230V
Rated speed: 0-510 / 0-1,150 / 0-2,500 rpm
Weight: 20.7 kg
Drilling diameter: 12-202 mm (masonry) 12-162 mm (concrete)

Eibenstock Core Drill Stand/Motor 250mm DBE250R

 

The unit for drilling up to Ø 250 mm

golz.png

fb33s.jpg.png

Features:

  • Electronic - soft start, temperature control and overcurrent cut-off, optical overload indication, constant speed
  • Cut-off carbon brushes - for the protection of the motor
  • PUR-construction site cable - strong, for heavy duty use
  • Mechanical oil bath gearbox - for optimal lubrication in all working positions, due to the newly developed oil pump
  • Mechanical safety clutch
  • Shaft seals replaceable from the outside - easy service
  • Integrated levels on the carriage, scale and hole center indicator on the drill rig – exact drilling
  • Quick-change plate - easy assembly to the drill rig
  • Column of the rig can be adjusted to 45°
  • Feed lever change without any tools - easy change of the working site
  • Retrofitable wheel axle (accessory) - easy transport

TECHNICAL DATA:
Input: 2500 W
Column length: 995 mm
Stroke: 700 mm
Nominal voltage: 230V
Rated speed: 360/850 rpm
Weight: 26.0 kg
Drilling diameter: 52-250 mm

Eibenstock Core Drill Stand/Motor 352mm DBE352

 

The powerful unit for drillings up to Ø 352 mm

eibenstock-logo.png

dbe_352s.jpg

Features:

  • Powerful 3,000 W motor with high power reserves and a long lifetime
  • Electronic - soft start, temperature control and overcurrent cut-off, optical overload indication, constant speed
  • service-LED - lets you know when the carbon brushes need changing (works for approx. 10 working hours before shutdown)
  • 3 speed oil bath gearbox - for optimal lubrication in all working positions, due to the newly developed oil pump
  • Mechanical safety clutch
  • PUR-construction site cable - strong, for heavy duty use
  • Universal connection - fasten the motor to the drill rig without any tools
  • Integrated spirit level on the machine as well as an additional handle and hole centre indicator allow for exact drilling
  • Column of the rig can be adjusted to 45°
  • Compact combination base - fixing with anchor or vacuum (vacuum set necessary)
  • Feed lever change without any tools - easy change of the working site
  • Removable wheel axle (accessory) - easy transport

TECHNICAL DATA:
Input: 3000 W
Column length: 995 mm
Nominal voltage: 230V
Rated speed: 230/500/1030 rpm
Weight: 35.0 kg
Drilling diameter: 42-352 mm

Note:

  • Core barrels are shown for illustrative purposes only - not included in the price!
  • Do not use the overload protection as on/off switch - when the overload fails, it will not be warranty
  • Use only heavy duty (2.5mm or thicker) extension cords and keep them as short as possible

For the operation and spare parts manuals for these machines  Click Here 

img_3515.jpg

Weka Eibenstock  Shibuya Goltz Total Husky Tool Machinery Mart